Hyundai Sonata: Radiator Grill Repair procedures - Front Bumper - Body (Interior and Exterior)Hyundai Sonata: Radiator Grill Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Remove the mounting clip (A) and then remove the front bumper energy absorber (B).

3.
Remove the pantoscopic camera.
(Refer to Body Electrical System - "Pantoscopic Camera")
4.
Loosen the radiator grill mounting screws.
5.
Unlock the lock pins by pushing it up with a screwdriver or remover and then remove the radiator grill (A).

6.
Install in the reverse order of removal.
   
Replace any damage clips.
    Radiator Grill Components and Components Location
    Component Location 1. Radiator grill ...

    See also:

    Emergency Fastening Device (EFD) Repair procedures
    Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the front seat. (Refer to Body - "Front Seat Assembly") 3. Remove the rea ...

    Catalytic Converter. Description and Operation
    Description The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx). ...

    Front Hub - Axle Repair procedures
    Replacement Front hub assembly 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A).     Be careful not to damage to the wheel cap (A) ...