Hyundai Sonata: Rail Pressure Sensor (RPS) Description and Operation - Engine Control System - Engine Control / Fuel SystemHyundai Sonata: Rail Pressure Sensor (RPS) Description and Operation

Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control correct injection amount and timing and adjusts the fuel pressure with the fuel pressure regulator valve if the target pressure and the actual pressure calculated by the RPS output signal are different.

    Heated Oxygen Sensor (HO2S) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between the HO2S t ...

    See also:

    Memory power seat unit Schematic Diagrams
    Circuit Diagram ...

    MENU : iPod
    In iPod mode, press the key to set the Repeat, Album Random, All Random, and Information features. Repeat Press the key Set [1 RPT] through the TUNE knob or key to repeat the current song. ...

    Repair procedures
    Operation and Leakage Check Check all of the following items: ComponentProcedureBrake Booster (A)Check brake operation by applying the brakes during a test drive. If the brakes do not work prope ...