Hyundai Sonata: Rear Back Armrest Repair procedures - Rear Seat - Body (Interior and Exterior)Hyundai Sonata: Rear Back Armrest Repair procedures

Replacement
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.

2.
Loosen the mounting nut of the rear back armrest after removing the cover (A) using a screw remover.

3.
Remove the rear back armrest (A) in the direction of the arrow.

4.
Install in the reverse order of removal.
    Rear Seat Cushion Cover Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

    Rear Seat Folding Lever Components and Components Location
    Components 1. Rear seat folding lever ...

    See also:

    Seat Heater Switch. Schematic Diagrams
    Circuit Diagram ...

    Heated Oxygen Sensor (HO2S). Schematic Diagrams
    Circuit Diagram ...

    CVVT Oil Control Valve (OCV) Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...