Hyundai Sonata: Rear Center Seat Belt Retractor Repair procedures - Rear Seat Belt - Body (Interior and Exterior)Hyundai Sonata: Rear Center Seat Belt Retractor Repair procedures

Replacement
   
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim")
2.
After loosening the retractor (A) mounting bolt, remove the rear center seat belt (B).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Rear Center Seat Belt Retractor Components and Components Location
    Component Location 1. Rear center seat belt retractor ...

    Rear Seat Belt Buckle Components and Components Location
    Component Location 1. Rear seat belt buckle [RH]2. Rear seat belt buckle [LH] ...

    See also:

    Canister. Repair procedures
    Removal 1. Disconnect the canister close valve connector (A). 2. Disconnect the ventilation tube quick-connector (B) and the vapor tube qu ...

    Power Window Switch Repair procedures
    Inspection Diagnosis with GDS 1. The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). The diagnostic system (GDS) provides the following informa ...

    Steering Angle Sensor Repair procedures
    Adjustment Calibration (Setting up the zero angle) Steering Wheel Angle Sensor of a absolute angle type (CAN type) measures the angle under the standard of the zero angle set. Calibration must be ...