Hyundai Sonata: Rear Console Cover Repair procedures - Floor Console - Body (Interior and Exterior)Hyundai Sonata: Rear Console Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the rear console cover (A).

2.
Disconnect the connector (A).

3.
Install in the reverse order of removal.
   
Make sure the connector is connected properly.
Replace any damage clips.
    Rear Console Cover Components and Components Location
    Component Location 1. Rear console cover ...

    Crash Pad
    ...

    See also:

    Automatic climate control system
    1. Turn the ignition switch to the ON position. 2. Select the defrost position pressing defrost button (). 3. While holding the air conditioning button (A/C) pressed, press the air intake contro ...

    Spark Plug Repair procedures
    Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the ...

    Interior light
    CAUTION Do not use the interior lights for extended periods when the engine is not running. It may cause battery discharge. WARNING Do not use the interior lights when driving in the dark. Accide ...