Hyundai Sonata: Rear Seat Cushion Cover Repair procedures - Rear Seat - Body (Interior and Exterior)Hyundai Sonata: Rear Seat Cushion Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
After loosening the mounting screws, then remove the rear isofix bracket (A).

3.
After removing the clips on the rear of seat cushion cover and remove the rear seat cushion cover (A).
[Front side]

[Rear side]

4.
Install in the reverse order of removal.
   
To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the clips (A).
Replace the hog-ring clips with new ones using special tool (C) (09880-4F000).

    Rear Seat Cushion Cover Components and Components Location
    Component Location 1. Rear seat cushion cover ...

    Rear Back Armrest Repair procedures
    Replacement     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to ...

    See also:

    Specifications
    Specifications Audio ItemsAudioModel1) RADIO/CD/MP3 (PA30A, Internal Amplifier)2) RADIO/CD/MP3/SDARS (PA30B+, Internal Amplifier)3) RADIO/CD/MP3/SDARS (PA30B+, External Amplifier)4) RADIO/CD/MP3/S ...

    Vehicle setting
    When the vehicle is at a standstill, pressing the TRIP button for more than 2 seconds with the engine start/stop button in the ON position or engine running, the LCD screen on the cluster will ...

    Fuel Tank Pressure Sensor (FTPS). Description and Operation
    Description Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge ...