Hyundai Sonata: Repair procedures - Trunk Lid - Body (Interior and Exterior)Hyundai Sonata: Repair procedures

Adjustment
1.
After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or right or left.
2.
Adjust the trunk lid height by turning the trunk lid overslam bumpers (B).
3.
After loosening the trunk lid striker (C) mounting bolts, adjust the trunk lid striker by moving it up or down, or right or left.

    Trunk Lid
    ...

    Trunk Lid Assembly Components and Components Location
    Component Location 1. Trunk lid assembly ...

    See also:

    Intake Air Temperature Sensor (IATS) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...

    Alignment. Repair procedures
    Front Wheel Alignment When using a commercially available computerized wheel alignment equipment to inspect the front wheel al ...

    Roof Side Molding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...