Hyundai Sonata: Repair procedures - BCM (Body Control Module) - Body Electrical SystemHyundai Sonata: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center facia panel.
(Refer to Heating, Ventilation and Air Conditioning - "Controller")
3.
Disconnect the body control module connectors (A).

4.
Remove the body control module (A) after loosening the mounting nuts.

Installation
1.
Install the body control module.
2.
Connect the body control module.
3.
Install the crash pad center panel.
BCM Diagnosis with GDS
1.
The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following information.
(1)
Self examination : Checking the failure code (DTC) and display.
(2)
Current data : Checking the system input/output data state.
(3)
Actuator test : Checking the system operation condition.
(4)
Additional function : Other controlling such as he system option and zero point adjustment.
2.
Select the "Car Model" and the system to be checked in order to check the vehicle with the tester.
3.
Select the "Body Control Module (BCM)" to check body control module.
4.
Select the "Current Data" menu to search the current state of the input/output data.
The input/output data for the sensors corresponding to the "Body Control Module (BCM)" can be checked.

5.
If you want to change user option, select "User Option".

    Description and Operation
    Description Body Control Module (BCM) Function NoItemDescription1Washer Linked Wiper - If the washer switch is pressed ON for 0.06~0.2 second with the vehicle mode in IGN2, the wiper rela ...

    See also:

    DCT (Dual Clutch Transmission) Repair procedures
    Removal 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the TCM. (Refe to Dual Clutch Transmission Control System - "TCM") 3 ...

    Starter Components and Components Location
    Components 1. Screw2. Front housing3. Stop ring4. Stopper5. Overrunning clutch6. Lever7. Lever plate8. Lever packing9. Magnet switch assembly10. Armature assembly11. Yoke assembly12. Brush (-)13. ...

    Crash Pad. Repair procedures
    Replacement Cluster Replacement • When prying with a flat-tip screwdriver, wrap it with ...