Hyundai Sonata: Rheostat Repair procedures - Lighting System - Body Electrical SystemHyundai Sonata: Rheostat Repair procedures

Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) after disengaging the mounting clip.

4.
Remove the rheostat switch connector (A).

5.
Check for intensity of new rheostat switch. If the light intensity of the lamps changes smoothly without any flickering when the rheostat is turned, it can be assumed that the rheostat is normal.

    Front Fog Lamps Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector (A). 4. Remove t ...

    See also:

    Front Impact Sensor (FIS). Description and Operation
    Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primar ...

    Specifications
    Specifications ItemSpecification Type Moter Driven Power SteeringSteering GearTypeRack & PinionSteering angle (Max.)Inner40.45° ± 2°Outer33.50° Tightening Torques ItemSpecification ...

    ETC (Electronic Throttle Control) System. Repair procedures
    Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output v ...