Hyundai Sonata: Rheostat. Repair procedures
Inspection
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the lower crash pad switch (A) from the side crash pad
cover by using the scraper.
[LHD]
[RHD]
|
3. |
Disconnect the rheostat connector (A) from lower crash pad switch.
|
4. |
Operate the rheostat switch and check for continuity between terminals.
|
Hazard Lamp Switch. Repair procedures
Inspection
Hazard Lamp Switch
1.
Remove the center fascia panel.
(Refer to the BD group - "Crash pad")
2.
Disconnect the ...
Front Fog Lamps. Repair procedures
Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch. (Refer
to the multi ...
See also:
Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below ...
Knock Sensor (KS) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold (Refer to “Intake And Exhaust System” in EM group).
3.
Disconnect ...
Stop Lamp Switch Schematic Diagrams
Schematic Diagram
System Circuit Diagram
Terminal function
TeminalDescription1IGN12Engine Control Module (ECM)3B+4Stop Lmap
...