Hyundai Sonata: Side Sill Molding Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Sonata: Side Sill Molding Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Loosen the side sill molding mounting screw and retaner.
2.
Using a screwdriver or remover, remove the side sill molding (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Rear Mud Guard Repair procedures
    Replacement     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to ...

    See also:

    Photo Sensor Description and Operation
    Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light r ...

    Specifications
    Specifications ItemSpecification Type Moter Driven Power SteeringSteering GearTypeRack & PinionSteering angle (Max.)Inner40.45° ± 2°Outer33.50° Tightening Torques ItemSpecification ...

    Sliding the sunroof
    When the sunshade is closed If you pull the sunroof control lever backward to the second detent position, the sunshade will slide all the way open then the sunroof glass will slide all the wa ...