Hyundai Sonata: Windshield Wiper-Washer Switch. Repair procedures
Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer Switch
Removal
| 1. |
Remove the steering column upper and lower shrouds after removing
3 screws.
|
| 2. |
Remove the wiper switch (A) by releasing the part.
|
| 3. |
If necessary of removing the wiper & washer switch (A), release
the lock of wiper switch using tool without removing the steering wheel
and the clock spring.
|
Installation
| 1. |
Install the wiper switch.
|
| 2. |
Install the steering column upper and lower shrouds.
|
Components and Components Location
Component Location
1. Windshield wiper arm & blade
2. Wiper & washer switch
3. Windshield washer hose
4. Windshield wiper motor & linkage
5. Washer ...
Front Wiper Motor. Components and Components Location
Component Location
1. Cap
2. Nut
3. Wiper arm & blade
4. Rivet
5. Cowl top cover
6. Bolt
7. Wiper motor & linkage assembly
...
See also:
Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions
only for the maintenance items that are easy to perform.
As explained earlier in this section, several procedu ...
Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gen ...
Snow tires
If you equip your car with snow tires, they should be the same size and have
the same load capacity as the original tires. Snow tires should be installed on
all four wheels; otherwise, poor handli ...