Repair procedures

Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel s ...

Flex Steer. Description and Operation

Instruction Flex Steer is system to choose the three modes power steering depending on driver preference or driving conditions. ...

See also:

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized HYUNDAI dealer. After starting th ...

Components and Components Location
Components 1. Piston ring 2. Piston 3. Connecting rod 4. Connecting rod upper bearing 5. Piston pin 6. Connecting rod lower bearing 7. Connecting rod bea ...