Hyundai Sonata: Flex Steer. Description and Operation - Steering wheel - Steering SystemHyundai Sonata: Flex Steer. Description and Operation

Instruction

Flex Steer is system to choose the three modes power steering depending on driver preference or driving conditions.
•
Display on the cluster but power steering is would not changed while operating the steering wheel.
As a safety measures, mode is changed automatically when steering wheel operation is done.
•
Be sure to carefully change the mode while driving.
•
Electric Power Steering (MDPS) is not working due to the failure, "flex steer" is may not work.
How to operate
•
First input : Display the current mode on cluster. (4 seconds)
•
Add input (4 seconds) : Mode is changed sequentially.

•
Three steering modes
COMRORT : For the elder and the female drivers: it is mainly used for city driving and stop & parking, and a little lighter power steering.
NORMAL : Basic mode
SPORT : It is mainly used for highway driving, and a little heavy power steering.

    Flex Steer. Components and Components Location
    Components Location 1. Flex steering switch ...

    Flex Steer. Schematic Diagrams
    Schematic Diagrams ...

    See also:

    Front Hub / Knuckle. Repair procedures - Revised
    Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel an ...

    Warnings and indicators
    All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized HYUNDAI dealer. After starting th ...

    Fan speed control
    The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fa ...