Hyundai Sonata: High Mounted stop lamp. Repair procedures
Removal
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the rear seat.
(Refer to the BD group - "Rear seat")
|
3. |
Disconnect the connector of high mounted stop lamp.
|
4. |
Remove the package tray trim (A).
(Refer to the BD group -"Interior trim")
|
5. |
Remove the high mounted stop lamp.
|
Installation
1. |
Install the high mounted stop lamp to the rear package tray.
|
2. |
Install the rear package tray trim.
|
3. |
Install the rear seat.
|
Front Fog Lamps. Repair procedures
Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch. (Refer
to the multi ...
Rear combination lamp. Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear combination lamp cover (A).
3.
...
See also:
Repair procedures
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replac ...
Inhibitor Switch Specifications
Specifications
? Type: Combination of output signals from 4 terminals
? Specifications
ItemSpecificationsOutput typeCombination of output signalsPower supply (V)12
Signal Code Table
...
Repair procedures
Adjustment
Inspect Glass Alignment
1.
Inspect the alignment of the movable glass (C) that is between the front (A) and rear (B) glass and if needed adjust it.
Alignment adjustment
Standard v ...