Hyundai Sonata: Input Speed Sensor. Specifications
Specification
|
Item |
Specification |
|
Type |
Hall Effect Sensor, 2pins (Power: 9V, Signal) |
|
Operation condition |
-40 ~150°C [-40 ~ 302°F] |
|
Sensor length |
52.7~52.9mm (2.0748~2.0827in.) |
|
Air gap |
0.95~1.65mm (0.0374~0.0650in.) |
Input Speed Sensor. Description and Operation
Description
- Integrated one unit for input & output speed sensor
- Differential current type (low: 7mA, high: 14mA)
- Failsafe: 4th gear hold (D), 2nd ~ 4th manual shift (S)
...
Input Speed Sensor. Repair procedures
Removal
1.
Remove the battery and the battery tray. (Refer to
"Charging system" in EE group.)
2.
Remove the under cover (A).
...
See also:
Seat Belt Pretensioner (BPT). Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Using a flat-tip screwdr ...
Checking the engine oil level
2.4 engine
2.0 engine
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes ( ...
Troubleshooting
Failure Diagnosis
1.
In principle, ESC and TCS controls are prohibited in case of ABS
failure.
2.
When ESC or TCS fails, only the failed s ...
