Hyundai Sonata: Instrument Cluster. Description and Operation - Indicators And Gauges - Body Electrical SystemHyundai Sonata: Instrument Cluster. Description and Operation

Description

ECO driving system
This system is designed to encourage eco-driving by providing real-time feedback to the driver.
The ECO indicator light assists you to drive in the most economical way.
The green indicator comes on when you drive with high fuel efficiency.
The fuel efficiency depends on driver's driving habit and road condition.
The system stops operation when the transaxle is in the P,R,N position or sports mode, or instantaneous fuel consumption mode is selected.
ECO indicator ON/OFF
1.
ECO indicator system stops operation when instantaneous fuel consumption mode is selected.
2.
ECO indicator light is always OFF when driver select the "ECO OFF" mode pushing the "Reset" button.
A.
Set the main LCD display to "ECO ON" pushing "Reset" button as below picture.
B.
And then set the "ECO OFF" pushing "Reset" button more than 1 second as below picture.
In this option, ECO indicator light does not operate any trip mode.

    Instrument Cluster. Schematic Diagrams
    Circuit Diagram Input/Output Specification ...

    See also:

    Components and Components Location
    Components Location 1. AVN (A/V & Navigation head unit) 2. Midrange speaker 3. External amplifier 4. Roof antenna (GPS + SDARS) 5. Front door speaker 6. Rear spe ...

    Description and Operation
    Limitations Of The Navigation system GPS Signal Reception State As the GPS satellite frequency is received/transmitted in straight lines, reception may not work if hiding devices are placed ...

    Repair procedures
    General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...