Hyundai Sonata: Intake Air Temperature Sensor (IATS). Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Sonata: Intake Air Temperature Sensor (IATS). Repair procedures

Hyundai Sonata YF 2011-2014 Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS). Repair procedures

Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”

    Engine Coolant Temperature Sensor (ECTS). Description and Operation
    Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor th ...

    See also:

    Tilting the sunroof
    To open the sunroof, push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof, pull the sunroof lever downward until the sunroof moves to th ...

    Power Seat Control Switch. Repair procedures
    Inspection With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. A ...

    Seat Belt Buckle Switch (BS). Description and Operation
    Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status ...