Windshield defrosting and defogging

WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshiel ...

To defog inside windshield

1. Select any fan speed except “0” position. 2. Select desired temperature. 3. Select the or position. 4. The outside (fresh) air will be selected automatically. If the outside (fresh) ai ...

See also:

Evaporator Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. After loosening the bolts remove the main crash pad and cowl cross bar assembly together. (Refer to Heater -"Heater Unit") ...

TPMS Sensor. Description and Operation
Description 1. Mode (1) Configuration State A. All sensors should be in the Low Line (Base ...

Alternator Schematic Diagrams
Circuit Diagram     • COM signal - When controlling the voltage generated, the ECM sends the target voltage data to the alternator via a PWM signal.(High voltage: 4V or h ...