Hyundai Sonata: Output Speed Sensor. Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Sonata: Output Speed Sensor. Specifications

Specification

Item
 Specification
Type
 Hall Effect Sensor,  2pins
(Power: 9V, Signal)
Operation condition
 -40 ~150°C [-40 ~ 302°F]
Sensor length
 30.1~30.3mm (1.1850~1.1929in.)
Air gap
 0.8~1.25mm (0.0315~0.0492in.)


    Output Speed Sensor. Description and Operation
    Description - Integrated one unit for input & output speed sensor - Differential current type (low: 7mA, high: 14mA) - Failsafe: 4th gear hold (D), 2nd ~ 4th manual shift (S) ...

    Output Speed Sensor. Repair procedures
    Removal 1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

    See also:

    Wipers and washers
    A : Wiper speed control · MIST – Single wipe · OFF – Off · INT – Intermittent wipe · LO – Low wiper speed · HI – High wiper speed B : Intermittent or Auto control wipe time ad ...

    Tire sidewall labeling
    This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be use ...

    ETC (Electronic Throttle Control) System. Description and Operation
    Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle ...