Hyundai Sonata: Special Service Tools - General Information - Engine Control/Fuel SystemHyundai Sonata: Special Service Tools

Special Service Tools

Item
Illustration
Application
Fuel Pressure Gauge
(09353-24100)

Measuring the fuel line pressure
Fuel Pressure Gauge Adapter
(09353-02100)

Connection between the high pressure fuel pump and the fuel feed line
Heated Oxygen Sensor Socket Wrench
(09392-2H100)

Removal and installation of the heated oxygen sensor
Fuel Pump Locking Ring Remover
(09310-2S200)

Removal and installation of the fuel pump (or sub fuel sender) locking ring
Torque Wrench Socket
(09314-3Q100)

Removal and installation of the high pressure fuel pipe
Injector Combustion Seal Guide & Sizing tool
(09353-2B000)

Installation of the injector combustion seal


    Specifications
    Specifications Fuel Delivery System Items Specification Fuel Tank Capacity 70 lit. (18.5 U.S.gal., 74.0 U.S.qt., 61.6 Imp ...

    Troubleshooting
    Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The mea ...

    See also:

    Limitation of Active ECO operation
    If the following conditions occur while Active ECO is operating, the system operation is limited even though there is no change in the ECO indicator. When the coolant temperature is low: The sys ...

    Radiator. Components and Components Location
    Components 1. Cooling fan assembly 2. Radiator 3. Mounting insulator 4. Radiator mounting bracket 5. Radiator upper hose 6. Radiator lower hose 7. Reservo ...

    Repair procedures
    Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the com ...