Hyundai Sonata: Special Service Tools - General Information - Engine Mechanical SystemHyundai Sonata: Special Service Tools

Special Service Tools

Tool (Number and name)
 Illustration
 Use
Crankshaft front oil seal installer
(09214-3K000)
(09231-H1100)

Installation of the front oil seal
A : 09214-3K000 (installer)
B : 09231-H1100 (handle)
Valve stem seal installer
(09222-4A000)

Installation of the valve stem oil seal
Valve spring compressor
(09222-3K000)
(09222-3K100)

Removal and installation of the intake or exhaust valve
A : 09222-3K000 (compressor)
B : 09222-3K100 (holder)
Crankshaft rear oil seal installer
(09214-3K100)
(09231-H1100)

Installation of the crankshaft rear oil seal
A : 09214-3K100 (installer)
B : 09231-H1100 (handle)
Ring gear stopper
(09231-3K000)

Removal and installation of crankshaft pulley bolt.
Ring gear stopper
(09231-3D100)

Removal and installation of crankshaft pulley bolt.
Torque angle adapter
(09221-4A000)

Installation of bolts & nuts needing an angular method of adjustment.
Oil pan remover
(09215-3C000)

Removal of oil pan
Oxygen sensor socket wrench
(09392-2H100)

Removal and installation of oxygen sensor


    Troubleshooting
    Troubleshooting Symption Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Worn crankshaft bearings Lo ...

    See also:

    Airbag Module Disposal. Description and Operation
    Airbag Disposal Special tool required Deployment tool 0957A-34100A Before scrapping any airbags or side airbags (including those installed in vehicle to be scrapped), the airb ...

    Start/Stop Button. Repair procedures
    Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad&q ...

    CVVT Oil Control Valve (OCV). Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated ...