Hyundai Sonata: To set cruise control speed - Cruise control system - Driving your vehicleHyundai Sonata: To set cruise control speed

1. Push the cruise ON-OFF button on the steering wheel to turn the system on.

1. Push the cruise ON-OFF button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which must be more than 25 mph (40 km/h).

Купить светодиодные led медиафасады.

3. Push the SET- switch, and release it at the desired speed. The SET indicator

3. Push the SET- switch, and release it at the desired speed. The SET indicator light in the instrument cluster will illuminate. Release the accelerator at the same time. The desired speed will automatically be maintained.

On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill.

    Cruise control system
    ➀ CRUISE indicator ➁ SET indicator The cruise control system allows you to program the vehicle to maintain a constant speed without resting your foot on the accelerator pedal. T ...

    To increase cruise control set speed
    Follow either of these procedures: Push the RES+ switch and hold it. Your vehicle will accelerate. Release the switch at the speed you want. Push the RES+ switch and release it immediatel ...

    See also:

    Relay Box (Engine Compartment). Schematic Diagrams
    Circuit Diagram ...

    Battery replacement
    A smart key battery should last for several years, but if the smart key is not working properly, try replacing the battery with a new one. If you are unsure how to use your smart key or replace ...

    Troubleshooting
    Trouble Shooting Ignition System Symptom Suspect area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switc ...