Accelerator Position Sensor (APS). Specifications

Specification Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 ~ 0.8 0.29 ~ 0.46 ...

Accelerator Position Sensor (APS). Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the ...

See also:

SRS Control Module (SRSCM). Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before b ...

Brake Pedal. Repair procedures
Removal 1. Remove the crash pad lower panel. (Refer to the Body group- crash pad). 2. Pull down steering column shaft after removing bolts ...

Center console storage
To open the center console storage, pull up the lever. ...