Hyundai Sonata: Driveshaft and axle
- General Information
- Front Axle Assembly
- Front Hub / Knuckle. Components and Components Location - Revised
- Front Hub / Knuckle. Repair procedures - Revised
- Driveshaft Assembly
- Rear Axle Assembly
Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure ...
See also:
Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is
armed.
A door is opened without using the transmitter (or smart key or mechanical
key).
The trunk is opened wi ...
Rear Upper Arm. Repair procedures
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Co ...

