Hyundai Sonata: Headlamp delay - Lighting - Features of your vehicle - Hyundai Sonata YF 2011-2018 Owner's ManualHyundai Sonata: Headlamp delay

If you turn the ignition switch to the ACC or OFF position with the headlights ON, the headlights (and/or tail lights) remain on for about 20 minutes. However, if the driverТs door is opened and closed, the headlights are turned off after 30 seconds.

The headlights can be turned off by pressing the lock button on the transmitter (or smart key) twice or turning the light switch to the OFF or Auto position. However, if you turn the light switch to the Auto position when it is dark outside, the headlights will not be turned off.

CAUTION

If the driver gets out of the vehicle through other doors (except driver's door), the battery saver function does not operate and the headlamp delay does not turn off automatically. Therefore, it causes the battery to be discharged. In this case,make sure to turn off the lamp before getting out of the vehicle.

    Battery saver function
    The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition key (smart key : turns ...

    Headlamp welcome function
    When the headlight switch is in the ON or AUTO position and all doors (and trunk) are closed and locked, if you press the door unlock button on the transmitter (or the smart key), the headlights w ...

    See also:

    OwnerТs responsibility
    ✽ NOTICE Maintenance Service and Record Retention are the owner's responsibility. You should retain documents that show proper maintenance has been performed on your vehicle in accordan ...

    Seat belt restraint system
    WARNING For maximum restraint system protection, the seat belts must always be used whenever the car is moving. Seat belts are most effective when seatbacks are in the upright position. Chi ...

    Ventilation
    1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desi ...