Hyundai Sonata: Positive Crankcase Ventilation (PCV) Valve. Repair procedures - Crankcase Emission Control System - Emission Control SystemHyundai Sonata: Positive Crankcase Ventilation (PCV) Valve. Repair procedures

Removal

1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).


Inspection

1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Installation

1.
Installation is reverse of removal.

PCV Valve installation:
1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft)


    See also:

    Troubleshooting
    Trouble Shooting Ignition System Symptom Suspect area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switc ...

    Balance Shaft & Oil Pump. Repair procedures
    Removal 1. Remove the timing chain. (Refer to Timing system in this group) 2. Install a stopper pin (A) after compressing the balance ...

    Vehicle weight
    This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability. Properly loading your vehicle will provide maximum return ...