Hyundai Sonata: Emission Control System
- General Information
- Description and Operation
- Specifications
- Troubleshooting
- Schematic Diagrams
- Components and Components Location
- Crankcase Emission Control System
- Schematic Diagrams
- Repair procedures
- Positive Crankcase Ventilation (PCV) Valve. Description and Operation
- Positive Crankcase Ventilation (PCV) Valve. Repair procedures
- Evaporative Emission Control System
- Description and Operation
- Schematic Diagrams
- Repair procedures
- Canister. Repair procedures
- Fuel Filler Cap. Description and Operation
- Fuel Tank Air Filter. Repair procedures
- Exhaust Emission Control System
Cruise Control Switch. Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
...
See also:
Front Impact Sensor (FIS). Description and Operation
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM).
They are remote sensors that detect acceleration due to a collision at its mounting
location. The primar ...
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desi ...
Seat Belt Pretensioner (BPT). Description and Operation
Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt hel ...
