Hyundai Sonata: Special Service Tools
Special Service Tools
|
Tool (Number and name) |
Illustration |
Use |
|
Alternator pulley remover wrench (09373-27000) |
|
Removal and installation of alternator pulley |
|
Micro 570 Battery checker |
|
(Using with Thermal Printer_182-003A |
Troubleshooting
Trouble Shooting
Ignition System
Symptom
Suspect area
Remedy
Engine will not start or is hard to start (Cranks OK)
Ignition lock switc ...
General Information
The Micro 570 Analyzer
The Micro 570 Analyzer provides the ability to test the charging and starting
systems, including the battery, starter and alternator.
...
See also:
Auto Light Switch. Repair procedures
Inspection
Lighting Switch Inspection
With the multi function switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, repla ...
Oil Level Gauge & Pipe Repair procedures
Removal and Installation
1.
Remove the oil lever gauge (A).
Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
2.
Install in the reverse order of removal. ...
Output Speed Sensor. Specifications
Specification
Item
Specification
Type
Hall Effect Sensor, 2pins
(Power: 9V, Signal)
Operation condition
-40 ...