Hyundai Sonata: Automatic climate control system
1. Turn the ignition switch to the ON position.
2. Select the defrost position pressing defrost button ().
3. While holding the air conditioning button (A/C) pressed, press the air intake
control button at least 5 times within 3 seconds.
The indicator on the air intake control button blinks 3 times with 0.5 second of interval. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, the system resets
Manual climate control system
1. Turn the ignition switch to the ON position.
2. Turn the mode selection knob to the defrost position ().
3. Push the air intake control button at least 5 times within 3 seconds.
The indicator ...
Storage compartments
These compartments can be used to store small items.
CAUTION
To avoid possible theft, do not leave valuables in the storage compartments.
Always keep the storage compartment covers closed while ...
See also:
SRS Control Module (SRSCM). Description and Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to discriminate between an event that warrants restraint system deployment
and an event that d ...
Rear Hub - Carrier. Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and ...
Power Seat Control Switch. Repair procedures
Inspection
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
the power seat switch.
A ...