Hyundai Sonata: ETC (Electronic Throttle Control) System. Troubleshooting
Fail-Safe Mode
|
Item |
Fail-Safe |
|
|
ETC Motor |
Throttle valve stuck at 5° |
|
|
TPS |
TPS 1 fault |
ECM looks at TPS2 |
|
TPS 2 fault |
ECM looks at TPS1 |
|
|
TPS 1,2 fault |
Throttle valve stuck at 5° |
|
|
APS |
APS 1 fault |
ECM looks at APS 2 |
|
APS 2 fault |
ECM looks at APS 1 |
|
|
APS 1,2 fault |
Throttle valve stuck at 5° |
|
When throttle value is stuck at 5°, engine speed is limited at
below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~ 31 mph)
|
ETC (Electronic Throttle Control) System. Description and Operation
Description
The Electronic Throttle Control (ETC) System consists of a throttle body
with an integrated control motor and throttle position sensor (TPS). Instead
of the traditional throttle ...
ETC (Electronic Throttle Control) System. Specifications
Specification
[Throttle Position Sensor (TPS)]
Throttle Angle(°)
Output Voltage(V)
TPS1
TPS2
0
0.0
5.0
...
See also:
Specifications
Specifications
Manual transaxle type
M6GF2
Engine type
Gasoline 2.4 GDI
Gear ratio
1st
3.267
...
Description and Operation
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation of On Board
Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model
year. The ...
Crankshaft Position Sensor (CKPS). Description and Operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the If there is no CKPS signal input,
the engine may stop because of ...
