Hyundai Sonata: Flex Steer. Repair procedures - Steering wheel - Steering SystemHyundai Sonata: Flex Steer. Repair procedures

Inspection

1.
Check the audio remote control switch for resistance between terminals in each switch position.
Switch
 Connector
terminal
 Resistance[KΩ]
Flex
 3-4
 1.44±5%
Trip
 3-5
 2.54±5%
RESET
 3-4
 5.54±5%


Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
3.
Remove the steering wheel.
(Refer to Steering Wheel - "Steering wheel ")
4.
Loosen the screw and then romove the steering wheel switch connector.

    Flex Steer. Schematic Diagrams
    Schematic Diagrams ...

    See also:

    Engine Mounting. Components and Components Location
    Components 1. Transaxle mounting bracket 2. Roll rod bracket 3. Sub frame 4. Engine mounting bracket 5. Engine mounting support bracket ...

    Impact sensing door unlock system (if equipped)
    All doors will be automatically unlocked when the impact is delivered to impact sensors while the ignition switch is ON. However, the doors may not be unlocked if mechanical problems occur with th ...

    Manifold Absolute Pressure Sensor (MAPS). Description and Operation
    Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog ...