Hyundai Sonata: Heated Oxygen Sensor (HO2S). Specifications - Engine Control System - Engine Control/Fuel SystemHyundai Sonata: Heated Oxygen Sensor (HO2S). Specifications

Specification

HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2]
A/F Ratio (λ)
Output Voltage(V)
RICH
Approx. 0.9
LEAN
Approx. 0.04

Item
Specification
Heater Resistance (Ω)
3.3 ~ 4.1Ω[21°C(69.8°F)]


    Heated Oxygen Sensor (HO2S). Description and Operation
    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies ...

    See also:

    Checking the engine oil level
    2.4 engine 2.0 engine 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes ( ...

    SRS Control Module (SRSCM). Repair procedures
    Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before b ...

    Inside rearview mirror
    Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. WARNING - Rear visibility Do not place objects in the rear seat o ...