PDM(Power Distribution Module). Repair procedures

Inspection PDM Diagnosis With GDS 1. It will be able to diagnose defects of Smart key with GDS quickly. GDS can operates actuator forcefully, input/output valu ...

Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to the BD group - "Cra ...

See also:

Rear Wheel Speed Sensor. Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Fuel Pump. Repair procedures
Removal 1. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). 2. Remove th ...

Manual climate control system
1. Turn the ignition switch to the ON position. 2. Turn the mode selection knob to the defrost position (). 3. Push the air intake control button at least 5 times within 3 seconds. The indicator ...