Canister Close Valve (CCV). Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the ...

Components and Components Location

Components Location 1. Fuel Tank 2. Fuel Pump 3. Fuel Filter 4. Fuel Pressure Regulator 5. Canister 6. Fuel Tank Air Filter 7. Fuel Tank Pressure Sensor ( ...

See also:

Rail Pressure Sensor (RPS). Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built ...

Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is armed. A door is opened without using the transmitter (or smart key or mechanical key). The trunk is opened wi ...

Anchor Pretensioner (APT). Description and Operation
Description Front seat belt anchor pretensioner operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on ...