Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Variable Intake Solenoid (VIS) Valve. Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance betwe ...

Fuel Pressure Control Valve. Specifications

Specification Item Specification Coil Resistance (Ω) 0.5 [20°C(68°F) ...

See also:

Specifications - Revised
Specifications Description Specifications Limit General Type In-line, DOHC 　 Numbe ...

Mode selection
Type A The mode selection button controls the direction of the air flow through the ventilation system. The air flow outlet port is converted as follows: Refer to the illustration in the “M ...

Start/Stop Button. Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad&q ...