Hyundai Sonata: Fuses And Relays - Body Electrical SystemHyundai Sonata: Fuses And Relays

Fuel Filler Door Open Switch. Repair procedures
Inspection 1. Remove the switch assembly (A) from the crash pad lower panel. 2. Disconnect the switch connector. 3 ...

Components and Components Location
Component Location 1. Front deicer relay 2. Back up relay 3. IGN2 4. Rain sensor 5. Start #1 relay (H1) 6. HAC relay 7. Wiper relay 8. IGN1 9. Start #2 rela ...

See also:

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross ...

The Other Fuses And Relays Component. Repair procedures
Inspection Power Relay Test (Type B) Check for continuity between the terminals. A : Two turn unlock relay 1. There should be continuity between the No.30 and No.87 ...

Tire sidewall labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be use ...