Hyundai Sonata: Description and Operation - General Information - Emission Control SystemHyundai Sonata: Description and Operation

Description

Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
•
The Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
•
The Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.

    Specifications
    Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C( ...

    See also:

    Components and Components Location
    Components 1. WI-FI antenna (AVN Only)2. Roof antenna3. Extenal amplifier4. AVN head unit (with Blue Link)5. Blue Link unit (Audio Only)6. Blue Link keypad ...

    Intake Actuator Description and Operation
    Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculat ...

    Dual Clutch Assembly Repair procedures
    Removal 1. Remove the dual clutch transmission from the vehicle. (Refer to Dual Clutch System - "Repair procedures") 2. Remove the retaining (A) and then removing the spline hub (B). 3. ...