Rear Bumper. Repair procedures

Replacement • After remove the rear combination lamp. • ...

Front Seat. Components and Components Location

Components 1. Headrest 2. Seat back panel 3. Seat back frame 4. Seat back cover 5. Seat cushion cover 6. Shield cover 7. Seat cushion frame 8. ...

See also:

Rail Pressure Sensor (RPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Trailing Arm. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Relay Box (Engine Compartment). Description and Operation
Description Network Configuration The Network of the SJB(Smart Junction Box) consists of Low speed CAN as shown in the following figure. Termination Resistor The SJB has CAN ter ...