Front Impact Sensor (FIS). Description and Operation

Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primar ...

Front Impact Sensor (FIS). Repair procedures

Removal • Removal of the airbag must be performed according to the precautions/ procedures d ...

See also:

Hazard Lamp Switch. Repair procedures
Inspection Hazard Lamp Switch 1. Remove the center fascia panel. (Refer to the BD group - "Crash pad") 2. Disconnect the ...

Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pulling it straight out. WARNING Prior to working on the Interior Lights, ensure th ...

Balance Shaft & Oil Pump. Repair procedures
Removal 1. Remove the timing chain. (Refer to Timing system in this group) 2. Install a stopper pin (A) after compressing the balance ...