Hyundai Sonata: SRSCM
- SRS Control Module (SRSCM). Description and Operation
- SRS Control Module (SRSCM). Components and Components Location
- SRS Control Module (SRSCM). Repair procedures
- Front Impact Sensor (FIS). Description and Operation
- Front Impact Sensor (FIS). Components and Components Location
- Front Impact Sensor (FIS). Repair procedures
- Side Impact Sensor (SIS). Description and Operation
- Side Impact Sensor (SIS). Components and Components Location
- Side Impact Sensor (SIS). Repair procedures
- Seat Track Position Sensor (STPS). Description and Operation
- Seat Track Position Sensor (STPS). Components and Components Location
- Seat Track Position Sensor (STPS). Repair procedures
- Seat Belt Buckle Switch (BS). Description and Operation
- Seat Belt Buckle Switch (BS). Components and Components Location
- Seat Belt Buckle Switch (BS). Repair procedures
- Weight Classification System (WCS). Description and Operation
- Weight Classification System (WCS). Components and Components Location
- Weight Classification System (WCS). Repair procedures
- Schematic Diagrams
Components and Components Location
Components
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Pressure Side Impact Sensor (P-SIS)
6. Side Impact Sensor (SIS ...
SRS Control Module (SRSCM). Description and Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to discriminate between an event that warrants restraint system deployment
and an event that d ...
See also:
Anchor Pretensioner (APT). Description and Operation
Description
Front seat belt anchor pretensioner operates as well as belt pretensioner
at the same time If it gets into its deploy condition after a collision. It
is located at near anchor on ...
Input Speed Sensor. Repair procedures
Removal
1.
Remove the battery and the battery tray. (Refer to
"Charging system" in EE group.)
2.
Remove the under cover (A).
...
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desi ...