Purge Control Solenoid Valve (PCSV). Description and Operation

Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when ...

Purge Control Solenoid Valve (PCSV). Schematic Diagrams

Circuit Diagram ...

See also:

Balance Shaft & Oil Pump. Repair procedures
Removal 1. Remove the timing chain. (Refer to Timing system in this group) 2. Install a stopper pin (A) after compressing the balance ...

Front Wheel Speed Sensor. Repair procedures
Removal 1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Front Stabilizer Bar. Repair procedures - Revised
Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...