Smart key unit. Repair procedures

Inspection Smart Key Unit - Refer to the BE group - inspection / self diagnosis with GDS. Smart Key Switch - Refer to the BE group - inspecti ...

Specifications

Specification Item Description Power source 3V Operating temperature -20°C ~ +60°C RF Modulation ...

See also:

Injector. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance betwee ...

Crankshaft Position Sensor (CKPS). Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” ...

Anchor Pretensioner (APT). Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Using a flat-trip screwd ...