The Other Fuses And Relays Component. Repair procedures

Inspection Power Relay Test (Type B) Check for continuity between the terminals. A : Two turn unlock relay 1. There should be continuity between the No.30 and No.87 ...

Components and Components Location

Component Location 1. Instrument cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fl ...

See also:

Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. WARNING A wheel that is not the correct siz ...

Seat Track Position Sensor (STPS). Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat asse ...

Closing the hood
1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the eng ...